1 x Automatic Geocell welding equipment 14/21 heads
Welding machine configuration table
Configuration name-Type specification-Unit of measurement
Cell welding equipment- -1 unit
Ultrasonic power supply-15K2600W-14/21 units
Welding die-15K-220mm-14/21 pieces
transducer-15KHZ-14/21 pieces
Weld bottom die-400-500mm-28/42 pieces
Stacking platform-50-200-8000mm-1 set
Moving power of solder joint-1.5kw-4s-1 set
Weld bottom die distance-60-75mm-14/21 sets
Welding machine parameter
Welding head station-14/21
Bottom weld number-28/42
Maximum output power-2.6-57.2KW±5％
Single head ultrasonic output power-2600W
Equipment dimensions (m)-9.6*2.2*2.5m
Equipment weight-7.25T
Rated input voltage-AC380V±5％ 50-60HZ±1HZ
Rated input pressure-0.8~1.0MPa
Air pressure vessel-≥0.6~1.0m³
Barometric flow-2.5~3.0m³
Width welding spacing-50mm-200mm
Length welding spacing-1000mm-7000mm
effective adjustment of welding spacing-320-600mm
Weldable material-PP、PE、PVC
Maximum output 24 hrs/day-2000-4000㎡
Production capacity per minute is calculated based on 200 mm sheet material- 8-12 pcs/sec.
Configuration Details
1). Except welding station, other actions of the whole machine are changed from pneumatic to electric and servo, which greatly saves air pumping capacity of air compressor.
2). The welding bottom die is controlled by servo motor to improve speed and accuracy. 3). Japan Mitsubishi programmable PLC controller FX3U.
4). Large size Shenzhen Display Control 10 inch man-machine interface touch screen.
5). Welding distance adjustment adopts servo motor control to change the traditional cylinder adjustment and improve the speed.
6). Lifting motor for welding slot sheet is 550W.
7). Intelligent automatic frequency tracking ultrasonic generator is 15K2600W. 8). Ultrasonic transducer is 15K2600W.
9). Ultrasonic die 15K2600W.
10). Welding machine main frame steel (GB)
11). Frequency converter: Taiwan shihlin electric control lifting pallet.
12). Automatic storage lift motor platform.
13). The effective length of the platform is 7.5m.
14). Adjustment of welding distance on the scale above each welding station.
15). Welding bottom die servo control in and out of 750 watts of precision reducer 1:4 speed ratio.
16). Adjustment of welding spacinge and welding bottom die size is input by touch screen.
17). Welding servo motor power 2.2 kW to precision reducer 1:10 speed ratio.
18). Single head welded cylinder size is 63x75-S.
19). AC contactor of low voltage electric apparatus: Schneider.
20). Touch screen control system: immovable.
21). Pneumatic components: China Airtek control system.
22). Mold welding material: 7075 Aeral.
23). Maximum moving distance of solder joint: 150mm-600mm.
24). Torch moving slider Brand: 30mm (HIWIN).
25). Automatic feeding tooling system: left&right two sets.
26). Remote control system: 1 set.
27). Low voltage appliance of the whole machine: Schneider.
Alarm function
1). Welding leakage alarm: automatic stop and display alarm station.
2). Sheet material fall off automatically alarm and stop.
3). Servo overlimit will alarm and stop.
4). Position failure: stop, alarm and display.
5). Die damage: stop, alarm and display.
6). Transducer damage: stop, alarm and display.
7). After power failure, the system automatically resets to the origin
